loading
RACEFACE Crankarms Next R 136 (30mm Spindle) DM Carbon 170

    RACEFACE Crankarms Next R 136 (30mm Spindle) DM Carbon 170

    RM 1,808.00

    Please select option below

    X

    Size
    Quantity
    - +
    1 left
    Delivery From Cheras / Selangor
    Estimated Arrival : 1-3 working days.
    Shipping Fee
    RM 7 by courier to Peninsular Malaysia
    RM 22 by courier to Sabah, Labuan
    RM 22 by courier to Sarawak
    RM 200 by courier to Oversea
    Ship To : International
    ADD TO CART
    BUY NOW
    Add to wishlist (1)
    Product ID : 212499316 Brand : RACEFACE Model / SKU : Crankarms Next R 136 Conditions : New


    RACEFACE Crankarms Next R 136 (30mm Spindle) DM Carbon 170

    RACEFACE Crankarms Next R 136 (30mm Spindle) DM Carbon 170


    RACEFACE Crankarms Next R 136 (30mm Spindle) DM Carbon 170


    RACEFACE Crankarms Next R 136 (30mm Spindle) DM Carbon 170

    RACE FACE crank Next R Carbon CINCH system colored 

    This stiff combination transfers every step into the pedal uncompromisingly on the underground! At 485 grams, the Next R crankset only weighs a little more than the ultra-light Next SL G4 crankset. The low weight is achieved by the hollow carbon crank arms and the crankshaft made of 7050 aluminum. Due to larger wall thicknesses compared to the Next SL, the Next R crank arms are also approved for hard Enduro use. Also, the pedal inserts have been reinforced with adopted technologies from the SixC Downhill crank to meet the greater demands. 

    The crankshaft is optimized for its width of 136 millimeters for frame with 148 mm BOOST standard. With a diameter of 30 millimeters, it is compatible with all standard bottom bracket standards such as BSA, Pressfit92 and PF30. If necessary, the shaft can also be replaced with a wider version for FatBikes. The highlight of the Next R is the CINCH system. An integrated wave profile in the right crank arm allows the Spider to be easily and quickly mounted, as can be disassembled. The spider is then secured with a lock ring. The assembly takes place via a commercially available bottom bracket key for cartridge bearings.

    NOTE: Matching spiders and chainrings can be found in our shop 


    Technical specifications: 

    intended use : XC Race, Trail, Enduro 
    Material crank arms: carbon 
    Material crankshaft: aluminum 7050 
    Diameter shaft: 30 mm 
    Fastening Kettenbatt / Spider: Race Face CINCH system 
    Crank arm length: 170 mm or 175 mm 
    Q-factor: 176 mm 
    Color crank arms: black, carbon 
    Color graphics: black, red, blue, green, orange or purple 
    Finish: UD Carbon matt 

    Weight: 485g (175mm, 32 teeth, without bottom bracket, manufacturer information) 

    Please visit our website at http://www.ecomtb.com.my OR https://shopee.com.my/eco_mtb
    ** There is 1-3cm errors due to manual measurement. Please kindly understand.
    ** Actual product colour may slightly vary due to photographic lighting sources or your monitor settings.
    ** WE DO NOT DO COD
    ** ONLINE ONLY
    ** We support original products only.

    ** PRICE INDICATED IS ALREADY BEST PRICE, EXCLUDE COURIER 


    Last Updated @ 5/7/2021 3:09:19 PM



    Average Product Rating

    0.0 stars out of 5
    5 star
    0
    4 star
    0
    3 star
    0
    2 star
    0
    1 star
    0
    Share your thoughts with others
    Write a review
    Only buyers who purchased the product may leave a review



    Information
    Copyright © 2024. All rights reserved | www.ecomtb.com.my | Powered by Webstorepro.my
    ECOBUILD HARDWARE - TAN MERE LEE 001871965-H