loading
CERAMICSPEED BB30 Bearing Kit - 101363

    CERAMICSPEED BB30 Bearing Kit - 101363

    RM 1,325.00

    Please select option below

    X

    Delivery From Cheras / Selangor
    Estimated Arrival : 1-3 working days.
    Shipping Fee
    RM 7 by courier to Peninsular Malaysia
    RM 22 by courier to Sabah, Labuan
    RM 22 by courier to Sarawak
    RM 200 by courier to Oversea
    Ship To : International
    Notify me when it is available again
    Add to wishlist
    Product ID : 206895888 Brand : CERAMICSPEED Model / SKU : 101363 Conditions : New


    CERAMICSPEED BB30 Bearing Kit - 101363

    CERAMICSPEED BB30 Bearing Kit - 101363


    CERAMICSPEED BB30 Bearing Kit - 101363

    OVERVIEW
    The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups.
     
    You have two bearing choices. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
     
    In The Box
     
    2 bearings.
    2 1mm spacers
    2 0.5mm spacers.
    2 dust covers.
    30mm wave washer
    10mm syringe of grease.
    Sticker sheet.
     
    TECH DATA
    BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That’s why the crank spindle is 30mm, which was a big jump up from narrow square-taper spindles.
     
    There are two widths, road=68mm, MTB=73mm. Specify so we can provide the proper grease.
     
    There are three grades of grease. TT and Track, All Round, and LongLife. The first is the least drag, the last is the most durable. All Round comes in road bearings, LongLife in MTB. Change the grease to tune performance.
     
    CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That’s in the range of a 75% drag reduction compared to standard bottom brackets. That’s thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings.
     
    Please visit our website at http://www.ecomtb.com.my OR https://shopee.com.my/eco_mtb
    ** There is 1-3cm errors due to manual measurement. Please kindly understand.
    ** Actual product colour may slightly vary due to photographic lighting sources or your monitor settings.
    ** WE DO NOT DO COD
    ** ONLINE ONLY
    ** We support original products only.

    ** PRICE INDICATED IS ALREADY BEST PRICE, EXCLUDE COURIER 


    Last Updated @ 16/5/2022 9:31:49 AM




    Average Product Rating

    0.0 stars out of 5
    5 star
    0
    4 star
    0
    3 star
    0
    2 star
    0
    1 star
    0
    Share your thoughts with others
    Write a review
    Only buyers who purchased the product may leave a review



    Information
    Copyright © 2024. All rights reserved | www.ecomtb.com.my | Powered by Webstorepro.my
    ECOBUILD HARDWARE - TAN MERE LEE 001871965-H